USAGE: Soft & Hard Plastics
Shopping Cart
Your Cart is Empty
Quantity:
Subtotal
Taxes
Shipping
Total
These tools are manufactured by Belin in France. They are very similar to the Onsrud 63-700 series. One key difference is that the tools are polished on the outside as well as inside the flute. These tools leave an exceptional finish in hard plastic, and some success in wood despite their aggressive chip evacuation.
Belin.Y 13000 series - 1 Edge Upcut Spiral O-Flute - Solid Carbide
Part Number | Cutting Dia | Cutting Lgth | Shank Dia | OAL |
|---|---|---|---|---|
13317 | 1/8 | 1/2 | 1/4 | 1 1/2 |
13317A | 1/8 | 1/2 | 1/8 | 2 |
13476 | 3/16 | 5/8 | 1/4 | 2 |
13476A | 3/16 | 5/8 | 3/16 | 2 |
13476B | 3/16 | 1 1/4 | 1/4 | 3 |
13635 | 1/4 | 3/4 | 1/4 | 2 |
13635A | 1/4 | 1 1/2 | 1/4 | 3 |
13635B* | 1/4 | 2 1/4 | 1/4 | 3 3/4 |
13635C | 1/4 | 1 1/8 | 1/4 | 3 |
13952 | 3/8 | 1 1/8 | 3/8 | 3 |
13952A* | 3/8 | 3 3/16 | 3/8 | 5 |
Belin.Y 12000 series - 1 Edge Downcut Spiral O-Flute - Solid Carbide
Part Number | Cutting Dia | Cutting Lgth | Shank Dia | OAL |
|---|---|---|---|---|
12317 | 1/8 | 1/2 | 1/4 | 1 1/2 |
12476 | 3/16 | 5/8 | 1/4 | 2 |
12635 | 1/4 | 3/4 | 1/4 | 2 |
* Extreme lengths are not recommended for anything other than foam